Web|Software|Desktop|Mobile developers. Find a remote job.

I have a dog collar transmitter with the dimensions of Length of Case: 1-7/8" Width of Case: 1" Depth of Case: 3/8" And I need an STL file (so I can 3d print it) created that I can use to encase it in. It will need a back with small holes so I can attach it to the collar. An example of the back door of the transmitter (although since this will go around the unit it will need to…

I had another person helping me with a project to design a case for a dog transmitter - and the project is 70% complete. Although due to timezone differences it wasn't working out very well. I need the screw holes to be larger, I need the holes on bottom to be twice the size, and some additional spikes added. This should not take longer than an hour.

i need help to subject related sensors and actuators if y are familiar with Tinker CAD and LabVIEW

1) Commercial Indoor Environment Controller Part 5: Lab Project Details 1) Commercial Indoor Environment Controller Design a monitoring and control system for a building HVAC system, with the following specifications: • One production area with separate temperature and humidity control • Temperature and humidity sensor values are logged every 15 minutes • Temperature and humidity setpoints are variable (analog inputs) • Heating and cooling system installed to control temperature • Rapid heating / cooling when more than 3°C away from…

1) Alarm & Building Management System Design a monitoring and control system for a building, with the following specifications: • 6 door/window alarms • 1 card-access door locks (doors only open when card swiped – indicate with digital input) • users cannot enter the building if they are already in it, or leave if they are outside • local alarm system (output to light) • able to call security (output to another light and serial output) • activated and deactivated…

Assembly Line Controller Design an assembly line controller with the following specifications: • master start and stop button for the whole system • controls the conveyor for three separate assembly stations • the controller tracks the location of parts at each station • each station can indicate if a part has failed or is rejected, and eject it from the line • only turns the conveyor on when all three stations indicate (digital input) that they have completed their task…

Assembly Line Controller Design an assembly line controller with the following specifications: • master start and stop button for the whole system • controls the conveyor for three separate assembly stations • the controller tracks the location of parts at each station • each station can indicate if a part has failed or is rejected, and eject it from the line • only turns the conveyor on when all three stations indicate (digital input) that they have completed their task…

I need TinkerCad project with coding and project report and diagrams for this project

It’s a small robot car project. The required part to do is the control subsystem. Using closed in loop models and PID control to control the direction and speed of the car.

It’s a robot car with left and right sensors which has sensors subsystem, motor subsystem, control subsystem and power subsystem. The required part to do is the control subsystem doing a closed loop model and PID controller on an arduino nano to control the direction and speed of the car

I have attached the pdf below.

The project is to be done on tinkercad and in C-STYLE Programming: The project should include the following topics : o Bitwise Operations o Interrupts o Timers (You can use any of the three timers, however, ONLY Normal and PWM Modes are allowed) You have to properly assign data types based on what is needed (example unsigned char if you variable’s maximum value is 230 and minimum is 0) • You should add comments to your code Mandatory Topics that…

Могу создавать презентации, 3Д моделирование (Sketch Up, Tinkercad) + создание небольших программ в python на заказ. О цене можно догоговорится. / I can create presentations, 3D modeling (Sketch Up, Tinkercad) + creation of small programs in python to order. You can agree on the price.

I have a pcb of side 6cm * 18cm roughly having DB9 connectors, leds and a micro usb. I want someone to design a smart rectangular enclosure for me in preferably tinkercad ( you're open to use others too) Freshies are welcome

Design a traffic lights controller for a road intersection : The intersection is between a major and minor road ( major road traffic is to be prioritized ) Pedestrian crosswalks have push buttons for activating pedestrian lights ( 2 buttons for each direction ) Use a speaker for visually impaired pedestrians ( one speaker is sufficient – use a piezo Arduino speaker) The minor road has a car detection sensor (use a push button) You are to document both design…